Design film vinyl 3D carbon fabric (silver) 127 cm

Технические характеристики

USA: width 50", weight 4.1 oz/yd²

• Self-adhesive
  
• Stretchable with heat
• Long lifespan in- and outdoors
• Water-resistant
• UV-resistant
• Could be applied wet and dry
• Can be cleaned with soap and water

Technical data:
Thickness: 0,12 mm
Weight: 140 g/m²

The self-adhesive surface with it`s detail-true carbon structure, is most appropriate for:

• Optical car tuning: Hoods, car interior, exterior mirrors, trim and much more.
• Boat building, inside and outside: board decorations, ship furniture, etc.
• General surface and facade finishing of buildings
• Car Wrapping: Full and part wrapping of automobiles

This film could be applied planar as well as over angles and edges. It is heat-formable and allows a blister-free and crease-free application.

Processing:

1. Cleaning of the surface with rubbing alcohol prior to installing the vinyl will help with adhesion and remove any contaminants that may cause imperfections
2. Using a heat gun can help at the application by making the vinyl more pliable and also will remove wrinkles
3. Using a soft rubber squeegee will help smooth out bubbles and wrinkles

Please notice:

1. No application in rainy or cloudy weather.
2. No waxing one week before the pasting of the car sticker.
3. No washing in 48hrs after the pasting.
   
4. If there is crimp or crease or if the temperature is low, better blow it with a hair drier first from a certain distance and then to paste.