Elan-tech® AW 89.1 Epoxy adhesive (hardener) can/ 9 kg
Технические характеристики
(hardener for resin Elan-tech® AS 89.1)Two component high performance adhesive based on epoxy resin suitable for bonding large structural parts. Due to its thixotropic formulation thick, uneven and even vertical adhesive joints could be realised.
Specifically developed for bonding CFRP parts, even though other materials could be used as well.
- Processing time: 20 minutes
Mixing ratio:
100 : 50 parts by weight resin : hardener
- High lap shear strength (up to 39 MPa at CFRP according to ASTM D 1002)
- High impact strength and peeling strength
- Thixotropic formulation (fills gaps up to 10 mm)
- Low exothermic reaction and shrinkage
- Colour: Black
Processing is very easy due to the application with a dosing gun. Mixing errors could be excluded through this also.
Suitable for the bonding of:
- GFRP / CFRP
- Ferrous and non-ferrous metals
- Wood
- Glass
- Ceramics
- Rigid foams
Please order resin Elantech® AS 89.1 (Order no 153891-A-x) separately.
References of the boat building industry:
Wally Europe (Italy & Tunisia), the Baglietto Group (Cantieri di Pisa, W.Magic, General Bateaux), Comar (Italy), Indiana Yachting (Italy), CMR (Italy), Cantieri Soleri (Italy), Cantieri Galetti (Italy)
References of the automobile industry:
Ferrari (Italy), Dallara (Italy), Camattini Meccanica (Italy), Scoda (C republic), Fiat (Italy), Volkswagen ( S.Africa), TataMotors (India)