Технические характеристики
Universal polyester putty for the professional use; for filling and fine filling of holes and imperfections in one go
Application:
Excellent adhesion on bare metal, wood, concrete, glass-fibre reinforced plastics, etc. • for filling of holes and imperfections in one go • spattle over by pretreated repairs for car body parts • metal surfaces, repairing and restauration from wood and concrete surfaces
Technical data:
Sanding after: approx. 20 to 30 minutes • pot life: 70 °F (20 °C): appr. 4 to 5 minutes • flash point: approx. 33 °C • density at 70 °F (20 °C): 1.8 g/cm³ • hardener: 2–3 % • temperature resistance of the cured material up to 160 °C • resistant against: solvents, propellants, acid, base, humidity and road salt • no differentiation for following surfaces necessary: galvanic zinc-coated, hot-dip galvanised or aluminium
Important:
Protect product from frost and heat • Storage temperature about 59 °F (15 °C) and 77 °F (25 °C) • Shelf life:12 months, by cool and dry storage of unopened can