Release agent (based on release spray) in canister

Технические характеристики

Easy to polish, soft release wax for epoxy, polyester, and polyurethane resins for max curing temperatures of 120 °C

Generally the open release spray is also applied with the HVLP-spraying method. With this spraying method the pressure and air flow are configured to the discharge quantity you want. Recommended nozzle diameter 0,5-1,00 mm. We recommend you use HVLP (high volume low pressure) spray guns that vaporises the medium at a low air pressure of 0,2-1.0 bar and a high air flow of about 600-2000 l/min.
Application with cloth is also possible.

Stir well before use since the active component settles. After coating the mould surface and flashing off the solvent, the properly stirred product produces a mat finished surface ready to polish.

PoxySystems® is a registered trademark of R&G

Content: 5 l