Epoxy Resin L + Hardener S (set of two components)
Технические характеристики
- Processing time: 15 minutes
Mixing ratio: 100 : 40 parts by weight of resin to hardener
Curing time: 24 hours
Cold curing
New Quality: free of Nonyl phenol and Benzyl alcohol.
Curing starts at 5 °C.
PoxySystems® is a registered trademark of R&G
- Low viscosity, free of solvents and fillers
- Fast impregnation of glass, aramid, and carbonfibres
- High static and dynamic strength
Epoxy resin L with the corresponding hardeners S, L, EPH 500, EPH 161 and W 300 is the most commonly used laminating and adhesive resin in the R&G delivery programme.
In conjunction with the hardeners S (15 minutes), L (40 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes) and W 300 (300 minutes), this epoxy resin exhibits strengths similar to those of the laminating systems usual in aviation. The heat distortion temperature ranges from 60 °C (S, L, EPH 500) to approx. 120 °C (EPH 161, after heat curing).
Expertise for the resin system epoxy resin L + hardener S: this system is not cytotoxic (cell damaging), important for applications in medical purposes!
Epoxy resin L has a low viscosity, is free of solvents and fillers, and is ideal for impregnating glass, aramid, and carbon fibres. Its low surface tension, good adhesion, and minimal curing shrinkage makes it ideal for bonding wood, metal, foamed polystyrene, etc. It can be processed in all of the customary methods, e.g. hand lay-up operations, pressure and vacuum impregnation, press moulding, winding, etc.
