Описание товара

Silicone rubber KDSV THX-30 (set of two components)

от 13.21 € Арт. 415220

Технические характеристики

KDSV THX-30 is a brushable, condensation curing 2-component silicone rubber for replicas using cast ceramic, plaster, polyester and polyurethane casting resins (not suitable for epoxy).

As both component batches are matches to each other, we only supply complete batches. It is not possible to obtain individual deliveries of silicone and hardener.

  • Good brushability
  • Fast vulcanisation at room temperature
  • Good tear strength and tear propagation strength

Technical data:
Mixing ratio: 100 : 3 parts by weight silicone : catalyst
Processing time: 30 ± 15 minutes
Curing time:
5 h

 

Colour: white, Mixing viscosity (25 °C): ≤ 38 000 mPa·s, Density: 1.18 g/cm³, Hardness Shore A: 36 ± 2, Tensile strength: ≥ 3.8 N/mm², Tear resistance: ≥ 28 KN/m, Elongation at break: ≥ 360 %

Selection chart (in german only, translator included)

 

Выберите интересующий вариант

Silicone rubber KDSV THX-30, kit/ 515 g

В наличии  -  Арт.: 4152202
13.21 €
Не доступен для заказа

Silicone rubber KDSV THX-30, kit/ 1.03 kg

В наличии  -  Арт.: 4152203
20.47 €
Не доступен для заказа

Silicone rubber KDSV THX-30, kit/ 5.15 kg

В наличии  -  Арт.: 4152204
76.76 €
Не доступен для заказа

Silicone rubber KDSV THX-30, kit/ 10.3 kg

В наличии  -  Арт.: 4152205
135.9 €
Не доступен для заказа

Silicone rubber KDSV THX-30, kit/ 25.75 kg

В наличии  -  Арт.: 4152206
303.69 €
Не доступен для заказа