Silicone rubber ADDV-42 (set of two components)

Технические характеристики

ADDV-42 is a Pourable, addition-curing 2-component silicone rubber particularly suitable for the reproduction of models with undercuts using polyurethane and epoxy resins.

Color: translucent (not transparent)

As both component batches are matches to each other, we only supply complete batches. It is not possible to obtain individual deliveries of silicone and hardener.

• Superior flowability
• Fast, shrinkage-free vulcanisation at room temperature
• Good tear strength and tear propagation strength

Technical data:
Mixing ratio: 1 : 1 component A : component B
Processing time: 30 ± 10 minutes
Demouldable: after 3 h at 23 °C (at 70 °C after 10 min)
Mixing viscosity: 10 000 mPa·s

Colour: Colourless translucent, density: 1.05 g/cm³, hardness Shore A: 42, elongation at break: 200 %, tear propagation strength: > 7 KN/m, linear shrinkage after 7 days at 23 °C: < 0.1 %

Selection chart (in german only, translator included)